visa
master-card
paypal
Welcome guest
0 item £
Hot to take measures
IMPORTANT COMMENTS WHEN TAKING MEASUREMENTS
• Between walls the measurements must be taken at 3 different points:

- Bottom(A)
- Middle (B)
- Top (C)
• For angular installations, the measurements must be taken from the external part of the tray to the wall, as shown in the diagram.
• For curved trays, two measurements must be taken, from the eternal part of the tray to the wall and the diagonal measurement of the tray, as shown in the diagram.
• For curved trays, if the walls are not in line this must be taken into account. If this is the case, add in the measurements shown in the diagram to the other measurements taken.
• For pentagonal trays, the three measurements shown in the diagram must be taken from the external part of the tray to the wall.
IN ANY CASE
• For built-in trays without rounded edging, the measurement must be taken from the corner to the wall, as shown in the diagram.
• For built-in trays without rounded edging, the measurement must be taken from the corner to the wall, as shown in the diagram.
SPECIAL MEASUREMENTS
Sloping ceiling
Sloping ceiling with half wall and glass sheet on the inside of the wall
Half wall with glass sheet on the inside section of the wall
Half wall with glass sheet on the outside section of the wall
Half wall with glass sheet on the inside section of the wall
Half wall with glass sheet on the outside section of the wall
Cutting-edge Technology for your home
guarantee
The European leading company that provides your home with total customization service
4.58 / 5.00 of 12 getyourshower.co.uk customer reviews | Trusted Shops